Call Us: 08048967533

Send Email/SMS

Double Seal (Mill)

Balance Pusher Seals using for Sealing Environment. Double Seals are excellent with high RPM Operation in Full Vacuum and Pressure. These Seals are a Multiple Spring Tandem Arrangement with 'O' Ring as secondary Sealing member. The design may either without bearing (Type 531/D) or with integral bearing (531/D/B). Various Elastomer can be offer for various Liquid applications.

  • Features:
    • Seal Type 531/D and 531/D/B Mechanical Seals are designed for Side Entry Drives in Dyno mills, Sand mills and Mixtures.
    • Compact Economical Cartridge Double Mechanical Seal for Side entry sealing equipments.
    • Seal Type 531/D/B Design Incorporate with location of Bearings very close to the Seal.
    • Complete Pre-assembled Tested Unit ready for installation.
  • Materials
    • Seal Ring Faces : Carbon and SiC
    • Seat Faces : SiC and TC
    • Elastomer : Viton, TTV, FEP
    • MOC : SS 316 - CHANGE OF MOC ON REQUEST
  • Operating Capabilities
    • Shaft Dia. : 50mm to 85mm
    • Pressure : Full Vacuum to 10 bar
    • Temperature : -30oC to 200oC (Depending upon Elastomer)
    • Speed : 1500 r.p.m.

Double Seal (Mill)

image not found

Double Seal (Mill)

image not found


Double Seal (Bottom Entry)

Seal Type 532/D and 532/D/B Mechanical Seals are designed for Bottom and Side Entry Drives in Reactors. Compact Economical Cartridge Double Mechanical Seal. The design may either without bearing (Type 532/D) or with integral bearing (532/D/B). Complete Pre-assembled Tested Unit ready for installation. These Seal are used for Exclusive Solid Seal Faces, Stationary Seats, thus Lowest Level of Seal Face distortion when Expose to Compressive Load and Thermal Pressure.

  • Features:
    • Balance Pusher Seals using for Sealing Environment.
    • Double Seals are excellent with Low RPM Operation in Full Vacuum and Pressure.
    • These Seals are a Multiple Spring Back to Back Arrangement with 'O' Ring as secondary Sealing member.
    • The design with integral bearing. Various Elastomer can be offer for various Liquid applications.
    • The Cooling Chamber of Seals also having a Standard Feature with helps to maintain Cool Environment around the Seal.
  • Materials
    • Seal Ring Faces : Carbon and SiC &TC
    • Seat Faces : SiC and TC
    • Elastomer : Viton, TTV, FEP and FFKM
    • MOC : SS 316 - CHANGE OF MOC ON REQUEST
  • Operating Capabilities
    • Shaft Dia. : 20mm to 150mm
    • Pressure : Full Vacuum to 10 bar
    • Temperature : -30oC to 260oC (Depending upon Elastomer)
    • Speed : 300 r.p.m.

Double Seal (Bottom Entry)

image not found

Double Seal (Bottom Entry)

Double Seal (Bottom Entry)